We use cookies to provide you with the best possible user experience. By continuing to use our site, you agree to their use. To learn more, view our Cookie Policy.
Free #1221 Air Cleaner With AVS or Performer Carb Purchase Shop Edelbrock
Toggle Nav
Pro-Flo XT Small Block Chevy EFI Black Intake Manifold
$710.95
Edelbrock Pro-Flo XT EFI Intake Manifold For Chevrolet 302-400 Small-Block V8
Availability:
In stock
SKU
71373
The Edelbrock Pro-Flo XT #71373 intake manifold is engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range. The Edelbrock Pro-Flo XT #71373 intake manifold is for 1957-86 S/B Chevy or S/B Chevy with E-Tec/Vortec heads. The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque throughout the rpm range (1500-7000 rpm). Pro-Flo XT EFI intakes accept Edelbrock Pro-Flo XT Throttle Bodies and Fuel Rails. The Edelbrock Pro-Flo XT #71373 also features a durable black powder coated finish for long lasting protection and a distinctive look. For the ultimate "Made in USA" quality, every Edelbrock intake manifold is cast and machined in the USA.
Installation Notes:
• Recommended gasket: Edelbrock #7201
• Manifold Dimensions: A-9.00", B-8.20", C-14.80"
• Compatible with Edelbrock #3869 90mm Pro-Flo XT Throttle body.
• Machined for a Edelbrock #36019 LS1 style MAP sensor, which mounts directly on the manifold.
• Throttle bracket included
• A bracket for mounting an LS1 style MAP sensor is included
• The Edelbrock #3627 Fuel rail kit including provisions for either Pico or standard height injectors is available separately.
• The throttle body centerline is located 2.5” behind and 6.07” above the front edge of the front end seal surface.
• Fits late model low profile water neck (such as TransDapt 9929 or GM 12342024 chrome thermostat housing)
• No provisions for exhaust heated chokes or EGR.
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
• Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
• Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
• NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.
Installation Notes:
• Recommended gasket: Edelbrock #7201
• Manifold Dimensions: A-9.00", B-8.20", C-14.80"
• Compatible with Edelbrock #3869 90mm Pro-Flo XT Throttle body.
• Machined for a Edelbrock #36019 LS1 style MAP sensor, which mounts directly on the manifold.
• Throttle bracket included
• A bracket for mounting an LS1 style MAP sensor is included
• The Edelbrock #3627 Fuel rail kit including provisions for either Pico or standard height injectors is available separately.
• The throttle body centerline is located 2.5” behind and 6.07” above the front edge of the front end seal surface.
• Fits late model low profile water neck (such as TransDapt 9929 or GM 12342024 chrome thermostat housing)
• No provisions for exhaust heated chokes or EGR.
• Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
• Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
• Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
• NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. 
Check items to add to the cart or
